CT/CE-8000 Series - NEWARE Battery Testing SystemNEWARE - Battery Tester & Cycler

CT-8002Q-5V100mA-124 NEWARE Battery Testing Solutions

CT-8002Q-5V100mA-124

CT-8000 Battery Testing System

NEWARE battery tester CT-8002Q-5V100mA is suitable for testing button batteries and supercapacitors. 4 ranges from 0.2 μA to 100 mA,2 channels.Including HPPC and GITT

● Voltage&Current Accuracy：±0.01% F.S.

● Recording Frequency：100Hz

● Current Response Time：≤1ms

● Minimum Pulse Width：500ms

● Off-Line Test：1GB/CH

● Cycle Life, GITT Test, DCIR Test, dQ/dV Curve

For Coin Cells, Super Capacitors, Three-Electrode Systems Testing and etc.

Voltage & Current	Range1	Range2	Range3	Range4
5V100mA	0.2μA ~ 0.1mA	0.1mA ~ 1mA	1mA ~ 10mA	10mA ~ 100mA

*Other models can be customized according to voltage and current requirements.

CE-8008-5V200A NEWARE Battery Testing Solutions

CE-8008-5V200A

CT/CE-8000 Battery Testing System

NEWARE 8008-5V200A battery tester for battery test, Electric vehicle battery, super capacitor, flow battery performs DOD,SOC,HPPC, tests, and data storage for test data.

● Voltage&Current Accuracy：±0.05% F.S.

● Recording Frequency：100Hz

● Working Condition Simulation：1,000,000 Rows

● Current Response Time：≤5ms

● Minimum Pulse Width：500ms

● Feedback Efficiency (Min) ：65%

Work simulation for power safety.

CE-8000	5V	100A	200A	300A	500A	600A
CT-8000	5V	30A	50A	100A	200A	300A
CT-8000	5V	500A	600A	800A	1000A	-

*CTE-8000：E indicates the energy feedback function.

*Other models can be customized according to voltage and current requirements.

Work scenarios simulated.
Enhanced data support.

Based on NEWARE 5th generation test system architecture, it can perform Cycle Life Test, Rate Charging / Discharging Test, Pulse Simulation Test, HPPC, etc. Meanwhile, it can simulate the actual driving road conditions of electric vehicles by dynamic power or current waveform.

Cycle Life Test

Rate Charging / Discharging Test

Pulse Simulation Test

HPPC

Multiple testing modes.
One equipment, unlimited capabilities.

Cycle life test

Rate Charging / Discharging Test

Pulse simulation test

GITT Test

DCIR test

dQ/dV differential capacity curve

Tailored for advanced battery testing: enabling dQ/dV differential capacity curve analysis capability.

Powerful programmability.
Meet diverse testing needs.

The software is fully functional, covering a variety of work-step settings, recording, and data storage to meet a wide range of testing needs.

DBC Configuration

CC & CV charge/discharge test

500ms pulse width

Segmented recording

Support import/edit/export of DBC files. Different battery pack protocols can be communicated by simply modifying the code of the DBC protocol file without upgrading the program.

CC charging or discharging until the voltage reaches the specified value, and then seamlessly switching to CV mode for battery compensation which is smooth without any spikes.

Testing the performance of the battery under fast changes in current/power.

Allow to set up to 3 segment recording conditions per step, including voltage, current and time.