FAQ is designed to assist users in swiftly resolving issues encountered during software installation, device usage, and testing processes. They ensure adherence to correct procedures, thus providing the most accurate measurement results possible.
The buzzer alarm in the lower right corner of the BTS client interface cannot be
Latest updated: Mar 25, 2024
In the lower right corner of BTS interface, beep alarm interface, all options are unchecked, turn off the computer sound, check "none", that is, do not use the external alarm.
If an external alarm is used for the device, you can simply unplug the alarm when this function is not needed. If this function needs to be used to only turn off the alarm, you can find the workstation or corresponding alarm channel, right-click and select "Audible and Visual Alarm Reset."
Note: In some specific modes, resetting the audible and visual alarm alone may not be sufficient. You may also need to clear the channel marking or make further connections.
