Hardware
Software
Battery Manufacturing Terminology
When the current exceeds the maximum and minimum values, the device starts the protected state.
If the current working power is greater than or equal to the set value, the channel is protected.
Charge with a constant voltage.
Charge with constant current and constant voltage.
Charge with constant current and constant voltage on battery packs
Charge with a constant power.
Test the ratio of voltage change to current change of the battery under operating conditions.
If the ΔV between the voltage of the first data of the rest step and the last voltage of the previous step exceeds the set value, the channel will be protected.
When the absolute value of the ΔV between the main channel and the auxiliary channel exceeds the set value, the voltage callback check deviation will not be judged.
During the test, if the battery parameters meet the protection conditions of the test process, the battery test will be stopped automatically.
Logical ID of the device.
The properties test of battery under the simulation of electric vehicles in different states.
The lowest allowable lower limit of the test instrument when the battery is discharged.
The relative error between the actual output voltage and the theoretical output voltage.
The current at which the battery terminates the test while the voltage remains constant.
The time required to transition from a charging step to a discharge step.
